Kore Essentials Tactical Gun Belt 1.5" - X5 Buckle Black
Kore Essentials Tactical Gun Belt 1.5" - X5 Buckle Black
Couldn't load pickup availability
Kore Essentials Tactical Gun Belt 1.5" - X5 Buckle Black
Description
Includes: X5 Buckle, Tactical Gun Belt 1.5", hex wrench & set screws
Kore Reinforced Every Day Carry belts are the most adjustable, supportive, comfortable belt you will ever wear. They provide a precise, secure fit - so you get a smooth, fast draw every time.
GUN BELT SPECS
- Hidden track with 40+ sizing positions (1/4” increments)
- Reinforced Power-Core center supports loads up-to 8 lbs
- Interchangeable with 1.5" wide EDC gun belts & buckles
- Large teeth clamp and screws secure belt-to-buckle
|
Belt Width/Thickness |
1.5” / 5 mm |
|
Load Rating |
Up to 8 lbs / IWB, OWB or Appendix |
|
Size Range |
Fits 24” - 54” |
|
Buckle Material / Finish |
Alloy / Powder Coat |
|
Buckle Size / Weight |
3.5” x 1.75” / 3.5 oz. |
|
Adjustable Track |
Provides over 40 - ¼” size positions |
|
Belt Reinforcement |
Power-Core™ Center for added stiffness & support. Virtually indestructible |
|
Belt Material |
Nylon Outer / Super Fiber Inner |
|
Belt Tip Keeper |
Included |
|
Interchangeable |
All X Series Gun Buckles + Western Collection Buckles |
SIZING GUN BELTS
Gun belts are ONE-SIZE and FIT ANY WAIST from 24” up to 44" [XL & Tactical belts up to 54"]
Here’s how to trim your new belt for a perfect fit. It’s easy and only takes a minute to do.
- On the back of the belt we printed a sizing ruler. Locate your pant size on the ruler - ADD 4 inches and CUT - using sharp, heavy-duty scissors.
- For example, if your pant size is 32” – cut the belt at 36” mark. If your pant size is is close to the maximum – do NOT cut the belt. Proceed to step 3.
- Using the wrench that is included, loosen the screws on the back of the buckle.
- Insert cut or blunt end of belt into buckle teeth and clamp down firmly. It’s OK to use force if needed (use tabletop for leverage) - the buckle won’t break.
- Tighten the screws until they are flush with the buckle. You will get resistance.
- Feed belt around your waist (L to R), thru buckle and the first belt loop. Pull until belt feels snug.
- Ideally, your belt tip should extend beyond the first belt loop by 2-3 inches. If your belt is too long – just remove the buckle and trim off one inch at a time until the desired length is achieved. Cut with Caution.
Collapsible row
Collapsible row
